Z3 Technology Z3-DM368-SDI-RPS User Instructions Download Page 2

Page: 2 / 50

CONFIDENTIAL

DOC-USR-0064-02

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Revision History

Version

Date

Change Note

Author

1.0

04/24/12

Original Z3-DM368-SDI-RPS System

1.06.16

09/29/14

Modified format to be in line with other DM368 User’s Guides.
Made document more robust.

1.06.17

10/02/14

Updated screenshots and filenames for 1.06.17, added section
on encoding MP1L2

1.06.19

12/08/14

Added Psf note in Section 4.1.  Modified table heading in Section
7.11.  Added Section 7.12 on RTMP streaming.  Added a note on
MAC addresses in Section 8.2.  Updated screenshots and
filenames for 1.06.19.

1.06.19a

12/16/14

Block diagram in Section 1.0, Latency note in 7.11, HW Warranty KA

“Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between

the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult

the dealer or an experienced radio/TV technician for help.”

Summary of Contents for Z3-DM368-SDI-RPS



















































Search results

Summary of Contents for Z3-DM368-SDI-RPS

Reviews:

Related manuals for Z3-DM368-SDI-RPS

Brands by name

Popular brands

Z3 Technology Z3-DM368-SDI-RPS, User Instructions

Search results

Summary of Contents for Z3-DM368-SDI-RPS

Reviews:

Related manuals for Z3-DM368-SDI-RPS

Brands by name

Popular brands