CONFIDENTIAL
DOC-USR-0064-02
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
22
At this point you can find out the new IP address assigned w/ DHCP by looking at the Serial UI:
You can return to Static IP by unchecking “Use DHCP”, saving to the user settings and rebooting.
7.10
Dynamically changing bit rate / frame rate
It is possible to change two parameters in the middle of an encoding session:
(1) Video Bit rate
(2) Frame Decimation
To change these, simply enter the new desired value and then click the “Start Encoder” button.
The web page will respond with the following message:
Status: Changed rate
The video stream will then continue uninterrupted with the new parameter.
New IP Address
Figure 14 Finding DHCP-assigned IP Address in the Serial UI
