Z3 Technology FSDI2-DCK-1X, User Manual

Page: 69 / 95

FSDI2-DCK-1X User Instructions
DOC-USR-0233-01
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
69
import Load settings from a previously exported file.
Reset Resets presets
10.3 The Status Tab
The Status tab may take a few seconds to load after being clicked.
Output
Value Explanation
Video Status
CH The channel number (1 - 3)
Bitrate
(Kbps) Current target bitrate of encoder
Actual
Bitrate Actual bitrate being output by encoder
FPS Current target frames per second of encoder
Actual FPS Actual frames per second being encoded
Key-frame
FPS # of key-frames per second (for example, a value of 0.5 means a key frame is inserted
every two seconds)
Width Width of encoded picture
Height Height of encoded picture. A small “i” will appear if interlaced is being encoded.
Audio Status
Channel The channel number (1 - 3)
Codec The codec being used to encode audio for that channel
Frames Number of frames sent from encoder to channel since the beginning of encoding.
Stream Status
Channel The channel number (1 - 3)
URL URL the channel is being streamed to
Frames Number of frames sent from encoder to channel since the beginning of encoding. This can
serve as a quick sanity check. (For example, you can click “Refresh”, count to 10, click
“Refresh” again, and you should see an increase of
around 600 for 60 frames per second
content).
Input Status
Input HDMI1 refers to the captured content from the camera lens
Resolution Capture resolution for video