FSDI2-DCK-1X User Instructions
DOC-USR-0233-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
34
6.7
Encoding KLV Stream
The FSDI2-DCK-1X is STANAG 4609/NGA MISP compliant and can place KLV data from the SDI ancillary
data in a UDP stream.
(1)
Return to the user interface.
(2)
Select “HD
-
SDI” from the Video Source drop down.
(3)
Select “UDP” from the Output Format drop down.
(4)
Select “TRUE” from the KLV Enable drop down. This will reveal the KLV Pid, KLV Bitrae, KLV Mode,
and KLV source settings.
(5)
Set the desired PID value (Most applications will dynamically find any PID with KLV). The default KLV
bitrate of 1000 bps is usually sufficient. If a higher data rate is expected set the bitrate higher.
(6)
Set the KLV Mode to “SDI”. The other positions are “FILE” and “SERIAL”. “FILE” will take a binary
file of capture KLV data as it’s source and “SERIAL” configures the unit to capture KLV via serial
(see section 6.19.1)
(7)
With SDI selected a gv7601 device will need to be entered as the source. On the FSDI2-DCK-1x, the
only availab
le gv7601 device is “/dev/gv7601.0” so enter this for the KLV Source.
(8)
Click the Start button and video will be streamed with KLV data.
Figure 30 Create Additional Output Channels
Click the “+” Tab
