Z-World XP8600, User Manual

Page: 92 / 99

XP8600/XP8900 92 s Simulated PLCBus Connections
(
BL1400 and BL1500
Expansion boards may be connected to header H3 on the BL1400 and
BL1500. The signals, listed in Table D-1, are laid out differently from
those on the other controllers, and so the special cable used for the
BL1000, the BL1100, or the BL1300 controllers will not work. The user
may either make a custom cable or use an adapter board available from
Z-World. Software from the Dynamic C
EZIOMGPL.LIB
library may be
used.
Use an external power supply with expansion boards con-
nected to the BL1400 or BL1500. There is no provision to
supply power from the controller to header P1 or P2 on the
expansion boards. The adapter board has a jack and a screw
terminal for the ex12 V/+24 V.
For more information on the adapter board, call your Z-World
Sales Representative at (530) 757-3737.
Table D-1. PIO Header to PLCBus Signal Map
BL1400/BL1500 Expansion Board
Header H3 Pin PIO Port Signal Header P1/P2 Pin PLCBus Signal
1 +5 V 2 +5 V
2 PA0 5 /STBX
3 PA1 19 D0X
4 PA2 20 D1X
5 PA3 17 D2X
6 PA4 18 D3X
7 PA5 11 A1X
8 PA6 9 A2X
9 PA7 7 A3X
10 GND 10 GND
!