rdq-6 instruction manual
z-systems audio laboratories
9
F
IGURE
8
•
channel selection
The rdq-6's display is only large enough to display the complete set of filter parameters for
one channel at a time. The purpose of the channel selection button is to scroll between the
filter parameters for each of the channels.
F
IGURE
9
How to do it. With the rdq-6 in normal operating mode, press the
channel
button. Figure 9
shows how the display looks when we are displaying the the Left/Right Front channel
settings. To change which channel is being displayed, turn the center knob until the channel
you would like to see is shown. If either the front or surround processor cards are in stereo-
linked mode, you will not see the individual left and right channels for these banks; they will
be displayed as a stereo pair. The same is true for the TTC pair if it is linked mode. If you
would like to apply tone control separately to the left or right channels of either of these two
banks, please see the section entitled stereo-linked/dual-mono mode.
•
bypass mode
Hitting the
bypass
button results in the state shown in Figure 10. The bypass mode sets all of
the filters flat, cancels the dither and returns all of the volume offsets to 0 dB; only the master
