background image

18

OPERATING TIPS

1. Just like other barbecues, the actual temperature of this grill or the cooking times

will be affected by external temperature, humidity, wind conditions, quality of pellets

and so on.

2. It is better to shelter your grill from the wind, this will aid in temperature output, heat 

retention and heat recovery time when opening the grill  lid.

3. Do not open the lid frequently, it will increase your cooking time. You can open the 

lid when you want the grill to cool down quickly.

4. Please preheat the grill for 10 minutes before placing food. This makes your grill to

heat up and quickly return to your desired temperature once your food is placed.

Otherwise it will take a longer period of time to bring both the grill and the food to your 

desired cooking temperature.

5. Never move your grill while running.

6. Never put water into the Pellet Hopper or Firepot.

7. Never add pellets to Firepot directly. It is dangerous. If you run out of pellets and lose 

your fire while cooking, let the grill cool down and start again with the INITIAL FIRING 

INSTRUCTIONS.

8. We recommend you cover your Grease Drain Pan with heavy-duty aluminum foil and 

change it frequently. This is the simplest way to maintain your Grease Drain Pan. Fail-

ure to clean the Grease Drain Pan, V-shaped Grease Drain and Grease Drain Tube may 

caused grease fires. If this situation happens, turn the Switch OFF(O) to reduce the 

amount of oxygen in the Chamber and keep the lid open until the fire is completely 

out. AT THE SAME TIME, BE CAREFUL NOT TO BURN YOURSELF. When the grill is 

completely cool, clean any grease accumulation from the V-shaped Grease Drain and 

the Grease Drain Pan. Replace the foil on the Grease Drain Pan. Then restart the grill 

and resume cooking.

Summary of Contents for ZPG-550B

























Reviews: