Figure 40 SSH
Enter the user name and password (Default user name/ password: admin/password)
respectively, you will see “
DEVICE123456>
”, which is the name of R1 Extender;
Enter
“
help
” command to get setting information; alternatively, you can refer to
Appendix C. SSH
Settings
for details.
SNMP
The R1 Extender supports SNMP management. Set the SNMP parameters and obtain MIB file before
remote management.
From
“
Remote Management
” in “
Management
”, set the parameters for SNMP:
-
Enable SNMP by checking “
Enable
”;
-
Specify the “
Read Community Name
”, “
Write Community Name
” and “
IP Address to
Receive Traps
”
-
Hit
“
Apply
” to save settings.
Chapter 5 Management Page 53
