sure the specified IP address is unique on your network in order to prevent IP conflict.
DHCP Client
Enable DHCP client to allow the DHCP server within your local area network to assign an IP
address automatically.
Spanning Tree Protocol (STP)
The Spanning Tree Protocol allows redundant connections to be created between different LAN
segments for purposes of fault tolerance.
Basic Wireless Settings
Open “
Radio
” in “
Wireless
” as below to make basic wireless configuration.
Figure 23 Basic Wireless Settings
Operating Mode
Four operating modes are available on R1 Extender. In a point to point environment where there
are only two radios, Peer to Peer is recommended as it works more efficiently.
Base Station
: The R1 Extender connects directly to the main Ethernet LAN and receives
Chapter 3 Basic Settings Page 31
