background image

7

Submenu Tire:

TPMS and tire size options
•  Set TPMS:

 Turn the tire pressure 

monitoring system on or off. 

•  Set Tire Pressures Front/Rear:

 Change 

the TPMS warning pressures – use 
the left arrow and /- buttons 

to raise or lower the pressure, then 
select it to save the new setting. (

The 

car’s computer will only recognize a 
minimum of 25psi.

)

Submenu Radio:

radio-based options

•  Set Backup Camera:

 If factory backup 

camera is deleted, this setting will disable 

it.

•  Set Cargo Cam: 

This will enable the 

“cargo cam” selector on the “controls” 

screen. Useful for front cameras.

•  Set DVD_CD:

 This setting adds the CD 

input on the UAQ radio, for use as an aux 

input, particularly useful if adding a media 

player or DVD player.

•  Set Travel Link:

 This setting adds the 

ability to disable SiriusXM Travel Link, 

which turns off the weather pop-ups. Also 

disables SiriusXM Traffic information. 

•  Offroad Pages:

 Activate the EVIC Offroad 

Pages after upgrading to an 8.4” radio

Submenu Lighting:

DRL and other lighting options
•  Set DRL Type:

 Choose USA (on but 

selectable), Canada (on all the time), or 
off.

•  Set DRL Location:

 Choose which 

lights to use as DRL’s (results vary with 
vehicle model) – Dedicated DRL, SRT 
DRL’s, Turns, Fogs, Hi beams or Low 
beams.

•  Set DRL Dropout:

 This setting is 

enabled by default, making the DRL 
turn off when using a turn signal. 
Turning this OFF will keep the DRL on 

even when a turn signal is in use.

•  Set Fog Lights Enable:

 If factory fog 

lights are added, this setting will enable 
them.

•  Set Fog Dropout:

 This setting is 

enabled by default, making the Fogs 
turn off when using high beams. 
Turning this OFF will keep the fogs on 
even when high beams are in use. 

•  One-touch:

 Enable one-touch lane 

change

•  Set Halo Enable:

 This setting is to 

Summary of Contents for Tazer JL Mini















Reviews: