background image

13

Cooldown
Front/Rear/Front+Rear Lockers 
SwayKill

Keep in mind that not all functions 
pertain to all vehicles. These remap 
buttons will only program and operate 
while Cruise Control is OFF. When Cruise 
is on, they will operate as normal cruise 
control buttons. For TC Kill, a vehicle 
restart is required to bring the system 
back to normal. For Lockers, the normal 
Locker off button disengages the 

lockers.

•  Partial Reboot:

 Press left arrow and 

cruise RES with the ignition set to RUN 
and engine is not running, and the Tazer 
will reset several systems including 
the PCM (engine adaptives), RF Hub, 

Instrument cluster, ABS, BCM.

•  License Plate Blanking: 

The license 

plate lights on the 

Gladiator JT

 will turn 

off when in reverse or using TurnCam to 
remove glare on the camera at night.

Configuration

Configuration of the Tazer is accomplished by using the supplied USB cable connected 

to a PC or Mac, using the ZPU Programming Utility. The ZPU User Guide explains how 

to install ZPU and how to perform firmware updates. 

If you misplace or damage your 

USB cable, you can replace it with any common “USB Mini B” data/charging cable.

Please see the accompanying “Light Show Configuration Guide” to configure your 

Tazer’s light show options.

The Unmarry Key

When you select “Unmarry” from the Tazer menu, all of your settings will revert to whatever they were when 
you originally Married your Tazer.
If you receive a Tazer second-hand, or lose access to your vehicle without unmarrying your Tazer and 
receive the 

“Not VIN XXXX”

 error:

1.  Navigate to the “UM Key” item in the Tazer’s EVIC menu, described on 

page 10

.

2.  Write this key down, and visit this URL to purchase our Unmarry Service, where you’ll be prompted to 

enter that key: 

https://www.zautomotive.com/product/unmarry-key/

3.  Return to the UM Key option in the EVIC menu and hit (Left Arrow + /-) to begin entering the 

code provided with your purchase.

4.  Press Left + Cruise On/Off to proceed to the next character.
5.  Once you’ve entered the last (eighth) digit, your Tazer will report whether the unmarry has succeeded or 

failed.

Summary of Contents for Tazer JL Mini















Reviews: