YZ Systems NJEX 7300L, Instructions & Operating Manual, Page: 66 / 126

YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
Page 56
NJEX 7300L ver.09042003
SSSSS
ECTION ECTION ECTION ECTION ECTION
9: S 9: S
9: S 9: S
9: S
ETTING ETTING ETTING ETTING ETTING
& T & T
& T & T
& T
ESTING ESTING ESTING ESTING ESTING
A A
A A
A
LARMS LARMS LARMS LARMS LARMS
Testing Alarm Out Status,
Continued
To Simulate the pump alarm status, figures 166-169,
press and release the Select key. The pmp Alarm
indicator in the upper left area of the N-300 display
will flash when it is selected. Use the Down Arrow
or Up Arrow keys to simulate which type of pump
alarm to activate. This will be shown by the solid
block appearing next to Over Pump, Under Pump, or
Pump Failure text at the top of the N-300 display,
and the PMP indicator will be displayed in UPPER
CASE letters, and will flash on and off. Press the
Enter key to return to the simulation selection
screen. The display will stop flashing. Press the
Down Arrow key to advance to the next simulation
option.
To Simulate the battery alarm status, figures 170-171,
press and release the Select key. The bat alarm
indicator in the upper left center area of the N-300
display will flash when it is selected . Use the Down
Arrow or Up Arrow keys to simulate a Low Battery
alarm. This will be shown by the solid block appearing
next to Low Battery text at the top of the N-300
display, and the BAT indicator will now be displayed in
UPPER CASE letters, and will flash on and off. Press
the Enter key to return to the simulation selection
screen. The display will stop flashing. Press the Down
Arrow key to advance to the next simulation option.
To Simulate the verometer alarm status, figures 172-
183, press and release the Select key. The vmtr
alarm indicator in the upper center area of the N-
300 display will flash when it is selected. Use the
Down Arrow or Up Arrow keys to simulate which type
of Verometer alarm to simulate. This will be shown
by the solid block appearing next to Odor Inlet-Cabl,
Odor Inlet Lo, Odor Inlet Hi, XTank-Cable, XTank Low,
XTank High, Flvalve-Fail, Leakage, Slow Fill, No Fill, or
Vmtr-Cable, text at the top of the N-300 display, and
the VMTR indicator will now be displayed in UPPER
CASE letters, and will flash on and off. Additionally,
at this position two Verometer Indicators, Overfill and
Fillrate, that are non-alarms may be simulated in the
same manner. They will be indicated at the same
location on the N-300 display, but will not have the
solid block appearing next to them, and the vmtr
pmp bat vmtr sig tnk
Pump Alarm
Simulate
Figure 166
pmp bat vmtr sig tnk
Battery Alarm
Simulate
pmp BAT vmtr sig tnk
Battery Alarm
Simulate
Low Battery
pmp bat vmtr sig tnk
Verometer Alarm
Simulate
pmp bat VMTR sig tnk
Alarm Output Status
*Set *Test *Esc
XTank High
pmp bat VMTR sig tnk
Alarm Output Status
*Set *Test *Esc
Vmtr-Cable
pmp bat VMTR sig tnk
Alarm Output Status
*Set *Test *Esc
No Fill
pmp bat VMTR sig tnk
Alarm Output Status
*Set *Test *Esc
Slow Fill
pmp bat VMTR sig tnk
Alarm Output Status
*Set *Test *Esc
Leakage
pmp bat VMTR sig tnk
Alarm Output Status
*Set *Test *Esc
Flvalv-Fail
pmp bat VMTR sig tnk
Verometer Alarm
Simulate
Odor Inlet-Cable
pmp bat VMTR sig tnk
Verometer Alarm
Simulate
Odor Inlet Low
Odor Inlet Hi
pmp bat VMTR sig tnk
Verometer Alarm
Simulate
pmp bat VMTR sig tnk
Verometer Alarm
Simulate
XTank-Cable
pmp bat VMTR sig tnk
Verometer Alarm
Simulate
XTank-Low
PMP bat vmtr sig tnk
Pump Alarm
Simulate
Over Pump
PMP bat vmtr sig tnk
Pump Alarm
Simulate
Under Pump
PMP bat vmtr sig tnk
Pump Alarm
Simulate
Pump Failure
Figure 167
Figure 168
Figure 169
Figure 170 Figure 171
Figure 172
Figure 178
Figure 173
Figure 179
Figure 174
Figure 180
Figure 175
Figure 181
Figure 176
Figure 182
Figure 177
Figure 183