CAMERA PARAMETER SETTING
The users can adjust the parameter settings when monitoring the ST16 Ground
Station screen.
1.
Tap the [ ] icon on the right side of the screen, you can choose 4 display
modes for the images shown on the screen.
Model: Typhoon H
Welcome,Pilot
1:39 AM 0
System Settings
Pad
Channel Settings
Model Select
TASK
CAMERA
GPS
CALIBRATION
NOT
AVAILABLE
Disabled
OBS.
7%
SD 7.23G
N/A
Visible
Infrared
Blend
Separate
INFRA
INFRA
43.9 C
41.3 C
VOLTS
GPS
SAT
POS
ALT
G-SPD
DIS
15.6V
Ready
0
0.0000 E
0.0000 N
-0.0 m
0.0 KPH
N/A m
1) “Separate” :
Press the “Separate” option, the visible images and infrared
images will be displayed separately on the screen. Touch the visible images or
infrared images shown in the upper left corner of the screen, you can switch the
position (between the infrared images and the visible images). The center-point
temperature detected by the infrared camera will be shown at the center of the
infrared images.
NOTICE:
The pictures and videos you have taken are saved in camera SD card
and internal storage of ST16 Personal Ground Station. The ST16 can store up to
22 pictures and 10 videos. When the number of picture exceeds 22 and the
number of video exceeds 10, the oldest pictures and videos will be erased auto-
matically from the ST16.
CAUTION:
Do not change settings when aircraft is farther than1000 feet from
ST16 Ground Station.
CAUTION:
ALWAYS stop recording video before turning off the Typhoon H/C-
GOET to avoid data loss. If you accidentally turn off the Typhoon H/CGOET
before you stop recording, re-insert micro SD card (if removed) and turn the
system on again. Wait approximately 20 seconds until the camera LED starts to
glow solid green indicating the last video file was recovered.
16
