Install-Xander_Insert_MASONRY - 2017-06-26.doc www.yunca.co.nz
Page 9 of 12
Q.
Thermal Blanket Installation
(Fig. 9)
Q1.
To ensure efficient operation it is recommended that thermal blanket (kaowool or
similar
– not supplied
) is affixed on the top, sides, and back of outer casing.
Q2.
Ensure rear air inlet is not obscured in any way.
Q3.
Blanket should be fastened to the outer casing in such a way that secure, long-term
fitment is assured. For example; using a high temperature multipurpose adhesive, or
screws and panel washers.
CAUTION
Before installing the fascia, ensure the thermal blanket completely surrounds
the top, sides, and back of the firebox (with the exception of the rear air intake),
and that there will be no gaps between the thermal blanket and fascia when
installed. Failure to do this will result in insufficient operation.
Fig. 9