Install-Xander_Insert_MASONRY - 2017-06-26.doc www.yunca.co.nz
Page 5 of 12
J.
YUNCA Insert Flue Kit
– Masonry
(Complies with AS/NZS 2918:2001):
J1.
Masonry Flue Kit consists of the following:
4.8m x 150mm stainless steel flue.
1.2m x 250mm galvanised liner.
1 x top cap & cowl (cone).
Please Note:
All flue joints must be sealed with flue sealing compound. Use stainless steel
screws or rivets to join the flue pipe (three equally spaced places at each joint). The first length
of flue must be fixed to the flue spigot with at least one stainless steel screw or rivet. The
required minimum flue termination height is 4.6 metres above the floor protector.
K.
Typical Masonry Flue Installation
(Fig. 3)
Complies (with heater) to AS/NZS 2918:2001
(Not drawn to scale)
Fig. 3