24
3. PARAMETERS AND SETTINGS
3.1 Parameter Lock (Loc) and Field Parameters
Parameter was protected by LOC (Parameter LOCK) to prevent setting error. The function was shown as below:
√
: allow to modify data or execute
X
: not allow to modify data or execute
Run, Stop, Hold. and Program Time & Temp. function just for AI-526P only
Loc
SV
AT
Primary
Parameter
Secondary
Parameter
Can changing status to Run,
Stop or Hold
Program Step Time & Temp.
0
√
√
√
X
√
√
1
√
X
√
X
X
√
2
X
X
√
X
√
X
3
X
X
√
X
X
X
4~255
X
X
X
X
X
X
808
√
√
√
√
√
√
Loc 808 is the master password, this valve can be change by parameter PASd.
Please set PASd cautiously, if the password lost,
you can’t access the parameter table again.
1 to 8 field parameters can be defined by parameters EP1 to EP8. If the number of the field parameters is less than 8, the first idle
EP parameter should be set to “nonE”. The initial values of EPs and Loc are EP1=HIAL, EP2=LoAL, EP3=HdAL, EP4=LdAL,
EP5=nonE, EP6=nonE, EP7=nonE, EP8=nonE and Loc=0.
You can redefine field parameters and Loc to change operation style. For example, you can execute auto tuning from field parameter
