4-27
2. During storage
1)
Start the engine and travel the machine for a short stretch every
month, so a thin coat of grease will cover the moving parts. At the
same time, charge the battery.
2)
Also run the air condition if it is assembled.
3)
Running the crawler.
3. Operation After long time storage
When you start the machine after a long time storage, do as follow:
1) Remove the excess grease with a duster from cylinder rods.
2) Add oil and grease to all place.
3) After the machine have stored for a long time, moisture content in
the atmosphere may mixed in the oil. Before or after starting the
engine, you should check the oil at all places. If the oil mixed with
some water, the oil at all places should be changed.
Attention: 1) According the climate, the machine can be stored
for a year by means of above method. However, after storing for
six months, you should operate every part for 15mins without
load. At the same time add the lubricant to every part.
2) Before operating the machine again, which have stored for a
long time, you should do some necessary inspection. After
stored over a year, the machine must be drained out and change
the oil from its reducers and hydraulic system, too.
WARNING: When storage machine in the
building, the antirust operation should be done,
and open windows and doors to improve the
ventilation for preventing gas poison.
