4-7
Machine moving
1. Safety rules for moving excavator
1) Please check the working site and surrounding environment, obstruction,
endurance of ground etc. before starting the excavator.
2) Honk to warm the people around the excavator before starting.
3) Do not start or operate excavator while the operator is not on the seat.
4) Working or walking of excavator or must be on the solid ground which width
is at least 1.5 times of the width of excavator.
5) There must be gesture command for excavator travels through underground
tunnel, bridge and high-voltage electric cable.
6) While excavator traveling, the boom and arm must be lowed down to keep
the center of gravity on optimal position.
7) Do not carry any other person except for the operator while the excavator is
mobbing.
8) Check chassis direction before turning the excavator’s direction.
9) When the doze blade is at rear of the machine, the operation the travel stick
contrarily.
10) Keep unrelated people from working site.
11) Remove obstacle from the traveling route of excavator.
12) It is the blind area at the rear of the machine, be carefully while reversing.
Warning: there will be dangerous to change direction while the
excavator traveling on high speed.
1) Do not change direction suddenly.
2) Do not change traveling direction reversely in short time.
3) Do not stop the excavator suddenly while the machine is
traveling on high speed.
2.
Prepare for moving machine
1) Turn the safety lock lever to unlock
position.
2) Pull the throttle lever close to the high
speed position.
