5-42
Replace Bucket and the Teeth
Replaces the bucket teeth before the teeth seat is fray.
Warning: it is very dangerous if the working device move
because of the wrong operation when replace the bucket teeth. Please
lock the working device, stop the engine and lock all operation levers
before replace the teeth. The teeth pin could pop out in any time, so
wear the protection device to avoid the injury.
Replace the Bucket teeth
1) Place the bucket on a heel block
for take-down the teeth pin.
Check the stability of the
working device, and make the
bucket place in level. Turn the
safety lock handle to the lock
position, then shut down the
engine.
2) Put the metal stick which the
diameter is smaller than the teeth
pin on the head of the pin, use the
hammer knock the stick to take
out the pin, then take-down the
teeth.
3) Clean the installing surface. Install
the new teeth into the teeth seat,
use the hand push the pin into the
hole, then use the hammer knock
the pin to lock the teeth on the
teeth seat.
