2-26
Prevent fire, blast and poisoning
●
When the excavator transported
、
driving
、
digging, it shouldn’t touch the
wire. Otherwise, it causes the casualty.
●
The wiring and the line needs to check
frequently. If it finds the broken
、
aging
part, it must be replaced to avoid the
fire.
●
Keep the line linker clean and fix it
firmly. Check the line everyday.
●
Do not put the thing which is
flammability or explosive into the
excavator.
●
Do stop the engine when it oils, and
keep away from the fire and do not
leave the machine.
●
When it is oiling , the fuel can’t overflow to the surface which is super
heated or the parts of the electric system.
●
After oiling, do clean the fuel or machine oil which overflow, and screw
down the cover of the fuel or the machine oil.
●
Clean out the slip
、
spill
、
lamina and other flammability thing which is in the
engine
、
the vent-pipe
、
the muffler
、
the engine room.
●
Do not put the dishcloth which is with the oil into the cab.
●
There should be fire extinguisher in the cab, and put it on the place where
can be easily to take from.
●
When the machine is welded, do segregate the pipeline of the hydraulic oil
and the fuel.
●
Do avoid the fire caused by the hydraulic pipeline. Check all the soft pipe
and the fastener
、
the cover
、
the block whether they fixed firmly.
●
Accumulator should be far away from the fire. Do avoid the high
temperature. Otherwise it will explode.
●
The excavator with cabin should be checked with the sealed center
clapboard. Do avoid the exhaust gas into the cab to cause the operator
poison.
●
Do not operate the machine on the area where the airiness system is not
good.
●
When the fire happens, do not use the water to put out the fire. Should use
the powder extinguisher or the sand, or use the slipcover.