9
SETTING THE TEMPERATURE ALARM
•
Press the “CHANNEL” button to select the desired sensor channel (CH1, CH2, CH3).
•
Press and hold down the “-” button for three seconds until, in the selected outdoor
temperature display, “OF” is shown and flashes. ,Press “+" or "–“ to turn ON or OFF the
temperature alarm. Press “MODE” to set the temperature. From -50°C to +70°C use “+ " or
"-“ for setting the wanted limit and press “MODE” to exit the setting.
INFORMATION:
•
You can set up a temperature alarm for every channel.
•
If you set the maximum to a temperature, which is lower than the minimum, then you will not
be able to complete the setting process.
•
The minimum must always be at least 1° C off the maximum value (-50° and +70°).
•
When the temperature alarm sounds, the appropriate channel and the upper or lower limit
symbol is shown.
RADIO FREQUENCY CONNECTION TO OUTDOOR SENSOR
•
Press the “CHANNEL” button to select a channel (1, 2, 3 or "scan"). This gives you the option
of reading three outdoor sensors with one weather station.
•
Press and hold down the “CHANNEL” button for three seconds to search for outdoor
sensors. You can break off this operation by briefly pressing the “CHANNEL” button.
