MultiLab 4010-1W
Settings
ba76141e07
08/2018
67
9.2
ORP measurement settings
9.2.1
Settings for ORP measurements
The settings are made in the menu for measuring settings of the ORP measure-
ment. To open the settings, display the required measured parameter in the
measured value display and press the
<ENTER>
key. After completing the
settings, switch to the measured value display with
<M>
.
Default settings are printed in
bold
.
9.3
D.O. measurement settings
9.3.1
Settings for D.O. sensors
(menu for measurement and calibration settings)
Settings
The settings are available in the menu for measurement and calibration set-
tings. To open the settings, display the required measured parameter in the
measured value display and press the
<ENTER>
key. After completing the
settings, switch to the measured value display with
<M>
.
The possible settings are individually displayed for each sensor. Below, the set-
ting menu is shown with all settings for all IDS-D.O. sensors.
Default settings are printed in
bold
.
3.
Confirm the setting with
<ENTER>
.
4.
Quit the menu with
<M>
.
Menu item
Possible setting
Explanation
mV resolution
0.1
1
Resolution of the mV display
Reset
-
Resets all sensor settings to the
delivery condition (see section
9.6.1 R
Menu item
Possible
setting
Explanation
Calibration
/
Calibration record
-
Displays the calibration record of
the last calibration.
Calibration
/
Calibration data
storage
/
Display
-
Displays the last calibration records
(max. 10)
Calibration
/
Calibration data
storage
/
Output to
RS232/USB
-
Outputs the calibration data stor-
age to the interface
