650 MDS
Section 3
YSI Environmental Monitoring Systems Operations Manual
3-25
“Calibrate” to “Continue”. Make sure that “Continue” is highlighted and press
Enter
to return to the
DO
calibration
menu.
3.4.3 COMMON OPERATIONS USING THE 650 SONDE MENU
SELECTION
The following section provides brief instructions for carrying out frequently used sonde activities via the
Sonde menu
selection of the 650. The instructions do not provide the detail of the examples above,
assuming that the user understands how to navigate the menus with the
Enter
,
Escape
, and
Arrow
keys
and is able to make alpha/numeric entries from the keypad.
3.4.3.1 Running the sonde in real-time
This function can be accomplished either automatically from the
Sonde run
selection of the 650 menu or
by using the
Sonde menu
selection to activate the
Run|Discrete Sample
submenu of the Main 6-series
menu. If the
Sonde run
selection is made, data automatically appears on the screen at a sample interval of
approximately 1 second. However, if the user chooses to use the
Run
function from the sonde menu, the
sample rate can be set to higher values in the Discrete Sample menu. This feature will be described in
detail in Section 3.5.2. To
Run
the sonde from the
Discrete sample
menu, highlight
Start sampling
and
press the
Enter
key.
3.4.3.2 Setting up a sonde for deployment
Use the
650 Sonde menu
selection to access
Run|Unattended sample
and then proceed with the setup for
the monitoring study as described in detail in Section 2 of the 6-series manual. Use the keypad to set the
sample interval and input file and site names. Then highlight
Start logging
and press
Enter
to begin the
Unattended study in which data is logged directly to the sonde memory. Finally, disconnect the 650 and
deploy the sonde.
3.4.3.3 Uploading data from sondes to the 650
Use the
650 Sonde menu
selection to access the sonde
File
menu and then choose either a
Quick upload
(all data in the last file) or
Upload
(complete or partial data in any sonde file) as described in detail in
Section 2 of the 6-series manual. After the proper selection is made, press
Enter
and the file will be
transferred automatically to the 650 memory with the 650 display indicating that an upload is in progress.
The uploading of data files from sondes to the 650 is demonstrated in greater detail in Section 3.7 below.
Summary of Contents for 6 series
Page 195: ...650 MDS Section 3 YSI Environmental Monitoring Systems Operations Manual 3 65 ...
Page 196: ...650 MDS Section 3 YSI Environmental Monitoring Systems Operations Manual 3 66 ...
Page 345: ...PAR Sensor Appendix K YSI Incorporated Environmental Monitoring Systems Operations Manual K 4 ...