24
Note: Do not attempt to remove the stainless steel inlet tube. Remember to realign the chamber
(described in Section 2, Installation) before initiating another monitor run.
The chamber body is machined from acetyl copolymer (tradename, Celcon). The outlet fitting is
polypropylene. The hardware parts are all stainless steel. Cleaning the chamber with boiling water and/or
steam sterilization will not harm the chamber parts.
;16#
7URXEOHVKRRWLQJ
This section provides a simple, but systematic, approach to establishing the cause of the most common
monitor station malfunctions. Symptoms related to 2730 Monitor and Control Accessory are somewhat
limited. Most problems will be related to monitor pump function and/or tubing obstructions.
Refer to Section 8 (Troubleshooting) in the 2700 SELECT USER’S MANUAL as an extension of this
troubleshooting section.
Before taking corrective action related to any problem, be certain to collect as much pertinent data as
possible. Try to make use of the 2730 service and diagnostic routines to test potential problem areas.
If you cannot resolve a problem, contact YSI Technical Support for help (See APPENDIX B). When you
communicate with service personnel, please indicate the serial number of the 2700 SELECT and the serial
number of the 2730 Monitor and Control Accessory. Also indicate software revision number, if known. If
you are writing or transmitting a FAX, include a thorough description of the problem. Include printouts in
the "detail" report format, if possible.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
