Setting up YOYORouter EE1 in Ethernet WAN Mode
1. Plug in the Ethernet cable and switch on YOYORouter EE1. Typical WAN sources include ADSL
modems, cable modems and hotel/office cabled Internet connections.
2. Connect to YOYORouter via Wi-Fi, access the status page at http://192.168.1.1 and log in.
3. Select
Wizard
and step through the Setup wizard. At the step
Select WAN Type
• Select
WAN Interface
type
Ethernet WAN
.
• Select the required
WAN Type
.
• Enter the further information requested, as applicable. See Configuration Reference section in the User
Guide for more information.
4. At the end of the Wizard, check
The Ethernet Port will be set as WAN Port
and click
Apply Settings
.
YOYORouter restarts.
5. Re-connect to the YOYORouter Wi-Fi network; you may need to re-make the connection in line with
your new settings.
