YOUYANG PAPI 400 User Manual Download Page 3

Page: 3 / 22

Operating and Maintenance Manual

PAPI 400

Safety precautions:

Operating and maintenance personnel should refer to ICAO Airport Services Manual

Part 9, “Airport Maintenance Practices” and to FAA Advisory Circular AC 150/5340-26
“Maintenance of Airport Visual Aid Facilities” for instruction on safety precautions.

Airport personnel must always observe safety regulations. Our equipment has been

designed and manufactured to allow safe and secure operation, however, the following

rules must be strictly observed.

Keep away from live circuits

Operating and maintenance manual must always follow the safety regulations.

Do not change lamps or components or make adjustments to equipment when the light

circuit is switched on.

See FAA Advisory Circular AC 150/5340-26 concerning safety.

Resuscitation

Operating and maintenance personnel should get acquainted with the resuscitation

techniques described in the First Aid Instruction Manual issued by the Red Cross

Organization or similar.

Safety Instructions

Summary of Contents for PAPI 400























Search results

Summary of Contents for PAPI 400

Reviews:

Related manuals for PAPI 400

Brands by name

Popular brands

YOUYANG PAPI 400, User Manual

Search results

Summary of Contents for PAPI 400

Reviews:

Related manuals for PAPI 400

Brands by name

Popular brands