8
POWER UP THE CONSOLE
1. Plug the power adapter USB plug to power up the main
unit.
2. Once the main unit power up, all the segments of the
LCD will be shown briefly before entering the radio-
controlled time reception mode.
3. The RC clock will automatically start scanning for the
radio-controlled time signal in 8 seconds and the LCD
backlight will temporary switch to low brightness level.
USB cable
NOTE:
- If no display appears on the LCD after inserting the batteries, press
[ RESET]
key by using a pointed object.
- In some cases, you may not receive the signal immediately due to the atmospheric disturbance.
TABLE STAND INSTALLATION
The unit is designed for desktop
or wall mount for easy viewing.
Follow the steps to hook the
table stand on the botton of the
console.
Step 1
Step 2
PAIRING OF WIRELESS 5-IN-1 SENSOR WITH CONSOLE
After power up, the console will automatically search and connect the wireless 5-IN-1 sensor (antenna
blinking).
Once the connection is successful, antenna mark and readings of outdoor temperature, humidity, wind speed,
wind direction, and rainfall will appear on the display.
CHANGING BATTERIES AND MANUAL PAIRING OF SENSOR
Whenever you changed the batteries of the wireless 5-IN-1 sensor, pairing must be done manually.
1. Change all the batteries to new ones.
2. Press
[ SENSOR ]
key on the console.
3. Press
[ RESET ]
key on the sensor.
NOTE:
- Pressing
[ RESET ]
key at bottom of wireless 5-IN-1 sensor will generate a new code for pairing purpose.
- Always dispose old batteries in an environmentally safe manner.
RADIO CONTROLLED / ATOMIC CLOCK FUNCTION
When the unit receives RCC signal, a sync-time symbol
will appear on the LCD, and synchronizes daily.
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal strength in 4 levels. Wave segment flashing means time signals are being
received. The signal quality could be classified into four types:
or
No signal quality
Weak signal quality
Acceptable signal quality
Excellent signal quality
NOTE:
-
Everyday the unit will automatically search for the time signal at 2:00am, 8:00am, 2:00pm and 8:00pm
- The strength of radio-controlled time signal from the transmitter tower may be affected by geographical
location or building around.
- Always place the unit away from interfering sources such as TV set, computer, etc.
- Avoid placing the unit on or next to metal plates.
- Closed areas such as airport, basement, tower block, or factory are not recommended.
