13
DEW POINT
- The dew point is the temperature below which the water vapor in air at constant barometric pressure
condenses into liquid water at the same rate at which it evaporates. The condensed water is called
dew
when it forms on a solid surface.
- The dew point temperature is determined by the temperature & humidity data from wireless 5-IN-1 sensor.
HISTORY DATA (ALL RECORDS IN THE PAST 24 HOURS)
The console will record past 24 hours weather data automatically that included past indoor and outdoor
temperature & humidity, baro, wind chill, wind speed and rainfall records.
1. Press the
[ HISTORY ]
key to check past 1 hour history records.
2. Press
[ HISTORY ]
key repeatedly to show past 2, 3, 4 , 5.......24 history weather records.
MAX/MIN MEMORY FUNCTION
1. Press the
MAX/MIN
key to check the maximum/minimum records. The checking orders will be: Outdoor
max temperature
Outdoor min temperature
Outdoor max humidity
Outdoor min humidity
Indoor max temperature
Indoor min temperature
Indoor Max humidity
Indoor min
humidity
Max feels like temperature
Min feels like temperature
Max wind chill
Min
wind chill
Max heat index
Min heat index
Max dew point
Min dew point
Max
pressure
Min pressure
Max average wind speed
Max gust
Max rainfall.
2. Press and hold the
[ MAX / MIN ]
key for 2 seconds to reset the maximum and minimum records.
NOTE:
When maximum or minimum reading is displayed, the corresponding time stamp will be shown.
HI / LO ALERT
HI / LO alert are used to alert you of certain weather conditions. Once activated, the alarm will turn on The
following are areas and type of alert provided:
Display segment
Type of alert available
Indoor temperature
HI and LO alert
Indoor humidity
HI and LO alert
Outdoor temperature
HI and LO alert
Outdoor humidity
HI and LO alert
Rainfall
HI alert (Daily rainfall since midnight)
Wind speed
HI alert
TO SET THE HI / LO ALERT
1. Press the
[ ALERT ]
key until the desired area is selected.
2. Use
[ UP ]
or
[ DOWN ] k
ey to adjust the setting.
3. Press the
[ ALERT ]
key to confirm and continue to next setting.
TO ENABLE / DISABLE THE HI / LO ALERT
1. Press the
[ ALERT ]
key until the desired area is selected.
2. Press the
[ ALARM ]
key to turn the alert on or off.
3. Press the
[ ALERT ]
key to continue to next setting.
NOTE:
- The unit will automatically exit setting mode in 5 seconds if no key is pressed.
-
When ALERT alarm is on, the area and type of alarm that triggered the alarm will be flashing and the alarm
will sound for 2 minutes.
- To silence the Alert alarm beeping, press the
[ ALARM / SNOOZE ]
/
[ ALARM ]
key, or let the beeping
alarm automatically turn off after 2 minutes.
