background image

7

Step 4

Place the nut in the hexagon hole of the stand, then 

insert the screw in other side and then tighten it by the 

screw driver.

Install the wireless 5-IN-1 sensor in 

an open location with no obstructions 

above and around the sensor for 

accurate rain and wind measurement. 

Install the sensor with the smaller end 

facing the North to properly orient the 

wind direction vane.

Secure the mounting stand and clamps 

(included) to a post or pole, and allow 

minimum 1.5m off the ground.

1.5 meter off

the ground 

Add rubber

pads before

mount on 

the pole

Point to

NORTH

MOUNTING GUIDELINES

1.  Install the wireless 5-IN-1 sensor at least 1.5m off the ground for better and more accurate wind 

measurements.

2.  Choose an open area within 150 meters from the LCD console.

3.  Install the wireless 5-IN-1 sensor as level as possible to achieve accurate rain and wind measurements.

4.  Mount the wireless 5-IN-1 sensor with the wind meter end pointing to the North to correctly orient direction 

of the wind vane.

A. Mounting on pole (Pole Diameter 1"~1.3")

(25~33mm)

B. Mounting on the railing

CONSOLE 

BACKUP BATTERY INSTALLATION

1.  Remove the battery door on the back side of the console.

2.  Insert CR2032 button cell as per the polarity information marked on the battery compartment.

3.  Replace the battery door.

Summary of Contents for YC9465


















Reviews: