23
RAINFALL
The
RAINFALL
reading displays in the middle right
of the LCD . It shows how many mm/inches of rain
have accumulated in the rain collector in one-hour
time period to indicate the current rainfall rate .
To set the rainfall unit
1 . Press and hold
[ RAINFALL ]
key for 2 seconds to enter unit setting mode .
2 . Press
[ GRAPH / Λ ]
or
[ °F / °C / V ]
key to toggle between mm (millimeter) and in (inch) .
3 . Press
[ RAINFALL ]
key to confirm and exit the setting.
To select the rainfall display mode
Press
[ RAINFALL ]
key to toggle between:
1 .
DAILY
- the total rainfall from midnight
2 .
HOURLY
- the total rainfall in the past hour
3 .
WEEKLY
- the total rainfall of the current week
4 .
MONTHLY
- the total rainfall of the current calendar month
5 .
Accumulate
- the total rainfall since the last reset
Note:
-In normal mode, press and hold
[ HISTORY ]
key for 2 seconds to reset the
Accumulate
rainfall record .
-To avoid the fault data, please reset the
Accumulate
rainfall when you reinstall your
wireless outdoor sensor to other location
HISTORY GRAPH
The history graph (
GRAPH
), at the bottom right of the LCD,
displays different weather histories in bar chart format .
To view different graphs
In normal mode, press
[ GRAPH / Λ ]
key to toggle between
different types of graph:
Weather variable
Unit of measure
Record time range Graph
Barometric
pressure
hPa, inHg and
mmHg
Past 72 hours
Indoor temperature
(according to the
current channel)
°F or °C
Past 72 hours
