17
The
INDOOR
Window
The INDOOR window displays the thermo-hygro reading of wireless
indoor thermo-hygro sensor(s) (Ch .1 -Ch .7)
Wireless Indoor sensor signal strength:
No signal
Weak signal
Good signal
Note:
Please locate the sensors where console can receive good signal .
Viewing Different Indoor Channel
This console is capable to pair with up to 7 wireless indoor thermo-hygro sensors . If you have 2
or more sensors, you can press
[ CHANNEL ]
key to switch between different indoor channels
in normal mode, or press and hold
[ CHANNEL ]
key for 2 seconds to toggle auto-cycle mode
to display the connected channels at 4 second intervals .
During auto-cycle mode, press
[ CHANNEL ]
key to stop the auto cycle and display the current
channel .
Comfort Indication
The comfort indication is a pictorial indication based on indoor air temperature and humidity in
an attempt to determine comfort level . Each indoor channel has independent comfort indication .
Too cold
Comfortable
Too hot
Note:
Comfort indication can vary under the same temperature, depending on the humidity .
There is no comfort indication when temperature is below 0°C (32°F) or over 60°C (140°F) .
Temperature / Humidity Trend
The temperature / humidity trend indicator shows the trends of changes in the forthcoming few
minutes . Arrows indicate a rising, steady or falling trend .
Arrow indicator
Temperature / Humidity trend
Rising
Steady
Falling
Note:
When temperature is below -40°C, the LCD will display “
Lo
” . If temperature is above 80°C,
LCD will display “
HI
” .
When humidity is below 1%, LCD will display “
Lo
” . If humidity is above 99%, LCD will display
“
HI
” .
WIND
The wind speed, direction and related information will be displayed in the
WIND
window at the
top-row-middle .
