Now carefully insert the flat cable into the socket. When the cable is inserted into position,
press the lock bar down to lock the cable. Never bend the cable end which is soldered to
the LCD PCB. This will break the cable at the end, because the thin tracks have no
protecting plastic at the end. Always push the bent part (the "U" part) to insert.
Another method of inserting the LCD is to insert the LCD with a slanted angle.
Fasten two 6mm-brass stands-off (the two brass stand-offs without a tail) to the mounting
holes with 2 flat-head screws.
Solder the four function buttons onto the DDS board.
7) Solder the 7-wire cable to CN1.
First, split the end leads to fit CN1.
Summary of Contents for TJ2B
