10
Step 5: Install the Handlebar Post
Required parts:
#5- Adjustment Pull Pin 1PC
#17 - Handlebar Post
#63 - Plum Blossom Screw
1.The #5 - Adjustment Pull Pin holds the seat at the correct height. It has two mechanisms, a pull pin
and a screw lock. The pull pin aligns the height with a hole in the #17 - Handlebar Post. For safe
operation the screw lock should always be engaged after adjusting the height.
2.Unscrew #5 - Adjustment Pull Pin counter-clockwise until you can pull on it and the handlebar tube
is clear to insert #17 - Handlebar Post.
3.Insert #17 - Handlebar Post into the handlebar tube of #15 - Main Frame while pulling the #5 -
Adjustment Pull Pin to allow it in.
Adjust the Handlebar Post height to a suitable location and release the pin into the closest notch hole
and screw down clockwise to tighten.
4. Screw #63 - Plum Blossom Screw in clockwise, to reinforce the #17 -Handlebar stability.
Summary of Contents for L-001A
