11
Step 6: Install the Handlebar and IPAD Holder
Required parts:
#20-Handlebar
#16-IPAD Holder
#25-Roundhead Inner Hexagon Screws 4PCS
#26-Spring Washer 4PCS
#27- Inner Hexagon Spanner
1. Secure #20-Handlebar to #17-Handlebar Post, using 4 #25-Inner Hexagon Screws and 4
#26-Spring Washers. Tighten and secure with #27-Inner Hexagon Spanner.
2. Attach #16-IPAD Holder on the #20-Handlebar.
Step 7: Install the Monitor
Required parts:
#19- Monitor #60- Monitor Support
Insert in the #60- Monitor Support on the Handrail according to the direction shown on the picture,
adjust the monitor view angle well, insert the Sensing Cable which remained from the #15-Main Frame
into the speed hole of monitor.
Note: There are two ends of the Sensing Cable. One is on the monitor and the other one is Near the
left Crank.
Summary of Contents for L-001A
