8
COUNTER-CLOCKWISE
as tightly as you can with your hand. Then use #28- Allen Wrench to tighten
and secure.
3. Align the #10- Right Pedal with the #9- Right Crank at 90°. Turn the pedal bolt on the #9-
Right Crank
CLOCKWISE
as tightly as you can with your hand. Then use #28- Allen Wrench to tighten
and secure.
Step 3: Install the Adjustable Seat Post
Required parts:
#4 - Seat post
#5 - Adjustment Pull Pin 1PC
1.The #5 - Adjustment Pull Pin holds the seat at the correct height. It has two mechanisms, a pull pin
and a screw lock. The pull pin aligns the height with a hole in the #4 - Seat post. For safe operation the
screw lock should always be engaged after adjusting the height.
2.Unscrew #5 - Adjustment Pull Pin counter-clockwise until you can pull on it and the seat tube is clear
to insert #4 - Seat post.
3.Insert #4 - Seat post into the seat tube of #15 - Frame while pulling the #5 - Adjustment Pull Pin to
allow it in.
Adjust the seat height to a suitable location and release the pin into the closest notch hole and screw
down clockwise to tighten.
Summary of Contents for L-001A
