2 |
P a g e
Quick Reference Guide
1.
Prior to installation, please ensure:
a.
The fireplace operates properly by plugging the power supply cord into a
conveniently located 120 volt grounded outlet.
b.
The light bulb in your fireplace is in good condition. Light bulbs may become loose
during shipping. If the flame effect is dim or does not work, please check that light
bulb or bulbs are finger tight in socket. See instructions for Bulb replacement.
2.
The electric fireplace heater may emit a slight harmless odor when first used. This odor
is a normal condition caused by the initial heating of internal parts and will not occur
again.
3.
If your heater does not emit heat, please ensure the Heater switch is in ‘ON’ position.
For further information, please consult section Operation of the Practical User’s Guide.
4.
Find a location for the electric fireplace that is protected from direct sunlight.
5.
Do not plug the unit into the power outlet before reading all instructions.
