10 |
P a g e
ELECTRICAL WORKS INSTRUCTIONS
_________________________________________
This fireplace must be grounded
1.
A standard electrical outlet must be closed to the fireplace. If the electric outlet is
required to be concealed, it can be located above or on the right hand side of the fire.
2.
DO NOT INSTALL THE FIREPLACE WHERE THE HEATER IS DIRECTLY
ABOVE AN OUTLET.
The heater is located in the center of the fireplace base.
3.
If the power supply cable becomes damaged in any manner it
MUST
be replaced.
4.
Always ensure that all electrical work complies with the relevant Building Codes. All
electrical work should be carried out by a qualified electrician.
5.
The fireplace must not be modified in any way or used for purpose other than those
recommended by Yosemite Home Decor.
6.
Please observe these instructions as failure to do so may result in electric shock or other
injury.
GROUNDING INSTRUCTIONS
___________________________________________________
This fireplace is for use on 120 volts. The cord has a plug as shown in (A) at Figure 7. An
adapter as shown in (C) is available
for
connecting
three-blade
grounding type plugs to two-slot
receptacles. The green grounding
lug extending from the adapter
must be connected to a permanent
ground such as a properly grounded
outlet box. The adapter should not
be used if a three-slot grounded
receptacle is available.
Fig. 7
