9 |
P a g e
C. Coals and Crystal Installation
Once fireplace is shipped, a standard coal is already attached to the unit.
To change from Coals to Crystal
1.
Unplug unit from the wall and ensure controls are switched off.
2.
Remove the glass face from the firebox unit and place the glass in a safe location.
3.
There is an angle iron bar that is located at both side of the fireplace. Unscrew the
angle iron bar before lifting the coal out from the fireplace.
See figure 3
Fig. 3
4.
Place the crystals by spreading into the glass media tray provided.
5.
Once done, re-attach the glass face to the firebox
To change from Crystal to Coal
1.
Unplug unit from the wall and ensure controls are switched off.
2.
Remove the glass face from the firebox unit and place the glass in a safe location.
3.
Remove the crystal out from the fireplace.
4.
Place the coal into the glass media tray provided and fix two (2) angle iron bar at
both sides of the fireplace.
5.
Once done, re-attached the glass face to the firebox.
