428546-YIM-C-1110
YCCS System Manager and Zone Coordinator Installation Instructions
2
Dimensions
Accessories
Table 1 lists the System Manager and Zone
Coordinator accessory.
Mounting
Follow these guidelines when mounting the System
Manager or Zone Coordinator:
•
Ensure that the mounting surface can support the
supervisory controller and any user-supplied
enclosure.
•
Mount the supervisory controller in an upright
position (Figure 1).
•
Mount the supervisory controller on a hard, even
surface in wall-mount applications whenever
possible.
If you must mount the supervisory controller on an
uneven surface, be careful not to crack the
supervisory controller housing when tightening the
screws. Use shims or washers to mount the
supervisory controller securely and evenly on the
surface.
•
Mount the supervisory controller in areas free of
corrosive vapors, and observe the environmental
limitations listed in the
Technical Specifications
section.
•
Allow sufficient space for cable and wire
connections (Figure 2).
•
Do not mount the supervisory controllers where
ambient temperatures may exceed 50°C (122°F).
•
Do not mount the supervisory controller on
surfaces prone to vibration or in areas where
electromagnetic emissions can interfere with
supervisory controller communication.
•
Do not obstruct the supervisory controller housing
ventilation holes.
•
Do not mount power transformers below the
supervisory controller.
Figure 1: System Manager and Zone Coordinator Dimensions and Configuration, mm (in.)
Table 1: System Manager and Zone Coordinator
Accessory
Code Number
Description
Y65T42-0
Transformer, 120/208/240 VAC
primary to 24 VAC secondary, 40 VA
hub mount, Class 2
