FORM 160.87-OM1
ISSUE DATE: 8/24/2018
JOHNSON CONTROLS
134
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
OVERVIEW
This screen allows definition of the sales order param-
eters. The commissioning date is entered by the Ser-
vice Technician at the time of chiller commissioning.
These values should never be changed or entered by
anyone other than a qualified Service Technician. The
remainder of the values are entered at the YORK Fac-
tory during the manufacturing of the chiller.
DISPLAY ONLY
Access Level Required: VIEW, ADMIN to Change
Model Number
Factory defined model number of the chiller system.
Panel Serial Number
Factory defined serial number for the micropanel.
Chiller Serial Number
Factory defined serial number for the chiller system.
YORK Order Number
Factory defined order number under which the chiller
was sold.
System Information
Factory defined conditions for which the chiller was
originally rated and sold.
Condenser and Evaporator Design Load
Information
Factory defined description of the condenser and evap-
orator configuration at time of shipment.
Nameplate Information
Factory defined information about the chiller motor
configuration.
PROGRAMMABLE
Commissioning Date
Access Level Required: SERVICE
Defines the date at which the chiller was commis-
sioned.
Job Name and Location
Access Level Required: SERVICE
Factory defined job name and location the chiller is
destined for.
SALES ORDER SCREEN
LD22052
FIGURE 55 -
SALES ORDER SCREEN