![background image](http://html.mh-extra.com/html/york/yhfmxh-028k-barx-fx/yhfmxh-028k-barx-fx_user-manual_947411011.webp)
10
Operation
Timer ON/OFF ON-OFF Operation
Before going to bed, you can simply press the SLEEP
button and unit will operate in SLEEP mode and bring you
a sound sleep.
3. In AUTO mode.
The unit operaters in corresponding sleep mode adapted
to the automatically selected operation mode.
Use of SLEEP function
After the unit starts, set the operation status, then press
SLEEP button before which the clock must be adjusted
and time being set.
Operation Mode
1. In COOL, DRY mode
1 hours after SLEEP mode starts, temp. will become 1 C
higher than temp. setting. After another 1 hours, temp.
rises by 1 C futher. The unit will run for further 6 hours then
stops. Temp. is higher than temp. setting so that room
temperature won be too low for your sleep.
2. In HEAT mode
1 hours after SLEEP mode starts, temp. will become 2 C
lower than temp. setting. After another 1 hours, temp.
decrease by 2 C futher. After more another 3 hours, temp.
rises by 1 C futher. The unit will run for further 3 hours
then stops. Temp. is lower than temp. setting so that room
temperature won be too high for your sleep.
4. In FAN mode.
It has no SLEEP function.
5. Set the wind speed change when sleeping
If the wind speed is high or middle before setting for the
sleep, set for lowing the wind speed after sleeping.
If it is low wind, no change.
Note
When TIMER function is set, the sleeping function can't
be set up. After the sleeping function is set up, if user
resets TIMER function, the sleeping function will be
cancelled; the machine will be in the state of timing-on.
3. Temperature setting
Press TEMP+ / TEMP- button.
Every time the button is pressed, temp.setting
increases 1 C; if kept depressed, it will increase
rapidly.
TEMP+
TEMP- Every time the button is pressed, temp.setting
decreases 1 C; if kept depressed, it will decrease
rapidly.
4. Fan speed selection
Press FAN SPEED button. For each press, fan speed
changes as follows:
Remote controller:
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner automatically
adjusts the fan speed according to room temperature.
Note
AUTO
COOL
DRY
FAN
HEAT
Display
Board
Remote
Controller
Operation
Mode
according to room temperature.
Under the mode of auto operation, air
conditioner will automatically select Cool or
Heat operation according to room
temperature. When FAN is set to AUTO, the
air conditioner automatically adjusts the fan
speed.
In DRY mode, when room temperature
becomes lower than temp.s 2 C ,
unit will run intermittently at LOW speed
regardless of FAN setting.
In FAN operation mode, the unit will not
operate in COOL or HEAT mode but only
in FAN mode, AUTO is not available in
FAN mode. And temp.setting is disabled.
In FAN mode,SLEEP operation is not
available.
MID
LOW
HI
AUTO