11
Note:
1.After setting the healthy airflow function, the position grill
is fixed.
2.In heating, it is better to select the mode.
3.In cooling, it is better to select the mode.
4.In cooling and dry, using the air conditioner for a long
time under the high air humidity, condensate water may
occur at the grille.
Operation
Timer ON/OFF ON-OFF Operation
Set clock correctly before starting TIMER operation.
1.After unit starts, select your desired operation mode.
2.Press TIMER button to change TIMER mode. Every time
the button is pressed, display changes as follows:
Remote controller:
Then select your desired TIMER mode (TIMER ON or
TIMER OFF or TIMER ON-OFF). " " or '' " will
flash.
3.Press TIME+/TIME- button to set time.
It can be adjusted within 24 hours .
ON
OFF
5.Cancel TIMER mode
Just press TIMER button several times until TIMER mode
disappears.
4.After setting correct time, press SET button to confirm
" " or " " on the remote controller stops flashing.
ON
OFF
Hints:
After replacing batteries or a power failure happens, time
setting should be reset.
Remote controller possesses memory function. When use
TIMER mode next time, just press SET button after mode
selecting if time setting is the same as the previous one.
According to the Time setting sequence of TIMER ON or
TIMER OFF, either Start-Stop or Stop-Start can be achieved.
Air Flow Direction Adjustment
1.Status display of air flow
COOL/DRY:
HEAT:
Initial state
Healthy airflow Operation
1.Press ON/OFF to starting
Setting the comfort work conditions.
2.The setting of healthy airflow function
1). Press the button of healthy airflow, appears on the
display. Horizontal airflow sending. Avoid the airflow blows
direct to the body.
2). Press the button of healthy airflow again, appears
on the display. Downward airflow sending. Avoid the airflow
blows direct to the body.
3. The cancel of the healthy airflow function
Press the button of healthy airflow again, the unit goes
on working under the condition before the setting of healthy
airflow function.
Notice:
Do not direct the flap by hand. Otherwise, the grille will
run incorrectly. If the grille is not run correctly, stop for a
minute and then start, adjusting by remote controller.
2.Left and right air flow adjustment
(available only for convertible unit)
Note:Postion 2 3 are null for this model.
Press button Enter left and right air flow adjustment
to adjust the air flow angle.