York YGWH 115, Installation, Commissioning & Operation

Page: 15 / 60

3-1
EN
Form 6S6I-B01C-EOMA-EN (0318)
3. Rigging, Lifting, Handling and Storage
RIGGING AND LIFTING SHOULD ONLY BE DONE BY A PROFESSIONAL RIGGER IN ACCORDANCE
WITH A WRITTEN RIGGING AND LIFTING PLAN. THE MOST APPROPRIATE RIGGING AND LIFTING
METHOD WILL DEPEND ON JOB SPECIFIC FACTORS, SUCH AS THE RIGGING EQUIPMENT
AVAILABLE AND SITE NEEDS. THEREFORE, A PROFESSIONAL RIGGER MUST DETERMINE THE
RIGGING AND LIFTING METHOD TO BE USED, AND IT IS BEYOND THE SCOPE OF THIS MANUAL
TO SPECIFY RIGGING AND LIFTING DETAILS. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN DEATH, SERIOUS INJURY OR EQUIPMENT DAMAGE.
Weights and Weight Distribution
Refer to the unit nameplate for unit shipping weight. Note that weight may vary depending on unit configuration at the
time of lifting. Standard weights and weight distribution are given below:
COMP
EVAP
COND
POWER CTRL
F1 F2
R1 R2
YGWH
Model Shipping Operating F1 F2 R1 R2
115 3906 4307 1124 1160 996 1027
145 4588 5089 1317 1356 1190 1226
180 5632 6270 1451 1479 1654 1686
225 6040 6839 1579 1620 1796 1843
260 7102 7802 2118 2148 1856 1883
300
8053 8882 2051 2077 2362 2392
330 8242 9271 2490 2527 2111 2143
375 8837 9948 2278 2310 2662 2699
Weight (kg) Point Weight (kg)