York YD360 Series, Installation Manual

Page: 35 / 38

5012886-YIM-B-0517
Johnson Controls Unitary Products 35
1034350-UCL-D-0817
Unitary Products Group 3
REFERENCE
General Inspection Completed See Notes
Unit inspected for shipping, storage, or rigging damage
Unit installed with proper clearances
Unit installed within slope limitations
Refrigeration system checked for gross leaks (presence of oil)
Terminal screws and wiring connections checked for tightness
Filters installed correctly and clean
Condensate drain trapped properly, refer to Installation Manual
All field wiring (power and control) complete
Refrigerant Line Inspection System 1 System 2
Is Condenser below Evaporator? Yes No Yes No
Total Line Length end to end. _______ Ft. _______ Ft.
Vertical Lift in Ft. _______ Ft. _______ Ft.
Vertical Fall in Ft. _______ Ft. _______ Ft.
Number of Elbows? _______ Ea. _______ Ea.
Liquid Line Size _______ Ea. _______ Ea.
Suction Line Size _______ Ea. _______ Ea.
Solenoid Valve? Yes No Yes No
Check Valves? Yes No Yes No
Check Valves / Solenoid arrangements installed as per UPG Piping Guide Yes No Yes No
Oil Separator ? Yes No Yes No
Accumulator ? Yes No Yes No
TXV - Hard shutoff Yes No Yes No
Heatpump Yes No Yes No
Air Moving Inspection Completed See Notes
Alignment of drive components
Belt tension adjusted properly
Blower pulleys tight on shaft, bearing set screws tight, wheel tight to shaft
Pressure switch or transducer tubing installed properly