background image

5012886-YIM-B-0517

36

Johnson Controls Unitary Products

1034350-UCL-D-0817

4

Unitary Products Group

Operating Measurements - Air Flow

ELECTRICAL DATA

T1 - T2  ____________________________  Volts

Control Voltage ______________________  Volts

T2 - T3  ____________________________  Volts

T1 - T3  ____________________________  Volts

Fan operates with proper rotation (All VFD equipped units with the optional Manual Bypass must be phased for correct blower 
rotation with the Bypass switch set in the LINE position)

ID Fans 

…

Exh. Fans 

…

Cond. Fans 

…

Pressure drop across dry evaporator coil (At maximum design CFM) 

1

1. Consult the proper airflow to pressure drop table to obtain the actual airflow at the measured pressure differential.

IWC

External Static Pressure

IWC

Return Static Pressure

IWC

Supply Static Pressure

IWC

Supply Air CFM Using Dry Coil Chart

CFM

Final Adjusted Supply Air CFM

2

2. Was a motor pulley adjustment or change required to obtain the correct airflow?

Was it necessary to increase of decrease the airflow to meet the design conditions?
If the motor pulley size was changed, measure the outside diameters of the motor and blower pulleys and record those diameters here;

Blower Motor HP  _______________________________FLA________ RPM________

Pulley Pitch Diameter  ______________Turns Out________ Final Turns Out________

Blower Pulley Pitch Diameter  ________________ Fixed Sheave_________________ 

CFM

Device

Nameplate

Measured

 List All Three Amperages

Supply Fan Motor

1,2

1. VAV units with heat section - simulate heat call to drive VAV boxes and VFD/IGV to maximum design airflow position.

2. VAV units  without he a t s e ction - VAV boxe s  mus t be  s e t to ma ximum de s ign a irflow pos ition.

     Notes above apply for 3rd party application only.

AMPS

AMPS

Condenser Fan #1

AMPS

AMPS

Condenser Fan #2 (if equipped)

AMPS

AMPS

Condenser Fan #3 (if equipped)

AMPS

AMPS

Condenser Fan #4 (if equipped)

AMPS

AMPS

Compressor #1

AMPS

AMPS

Compressor #2 (if equipped)

AMPS

AMPS

Compressor #3 (if equipped)

AMPS

AMPS

Compressor #4 (if equipped)

AMPS

AMPS

Summary of Contents for YD360 Series







































Reviews: