FORM 195.26-NM3
YORK INTERNATIONAL
75
OPTIONAL DECORATIVE TAMPERPROOF
ENCLOSURE (LOUVERED)
General
A louvered tamperproof enclosure is available for the
chiller for the prime purpose of deterring unauthorized
access to components of the chiller.
Kit 475-05561-002 is the decorative/tamperproof en-
closure which consists entirely of louvered sheet metal
panels along with mounting hardware. This kit has a
further purpose of presenting a pleasing appearance
to the chiller when it is located in a highly visable area.
Installation
1.
Refer to Fig. 35 and the associated parts list. Be-
fore starting installation, all of the items in the kit
should be identified by comparing with Fig. 36.
2.
All holes for mounting kit parts are provided in
both the chiller frame and the added supports;
therefore, it should be unnecessary to drill holes.
3.
Install the louvered panels using the proper hard-
ware and supports. Refer to Fig. 35 and the Parts
List for placement of the panels and the proper
hardware required. Discard exisiting grilles to at-
tach the louvered panels where necessary.
4.
Notch panels to suit refrigerant piping and wiring
harnesses as needed.
5.
If the High Ambient Sunshield Kit or Disconnect
Option is installed, field adaption will be required
where parts of the kits interfere. Touch up ex-
posed metal parts to prevent rust.
Parts List
PART #
ITEM
QTY.
DESCRIPTION
021-16161-000
2
18
Screw, Cap Hex 1/4-20
021-16128-000
3
18
Lock Washer TH INT1/4
021-16151-000
4
18
Nut, Hex 1/4-20
021-16165-000
5
6
Washer, PL 5/16 x 3/4
021-16136-000
6
97
Screw, Tap Cut 1/4-20
021-17515-000
7
11
Screw, Tap Cut 1/4-20 x 1
075-05463-000
20
1
Support, Grille Front Bot.
066-94647-000
21
3
Support, Grille Rear Top
075-01700-00
22
6
Panel, Louver
075-05660-000
23
1
Panel, Louver
075-05659-000
24
1
Panel, Louver
075-05641-000
25
2
Support, Top R.H. Grille
075-05656-000
26
1
Panel, Louver
075-05657-000
27
1
Panel. Louver
075-05658-000
28
1
Panel, Louver
075-01671-000
29
2
Clip, Retainer
066-94664-000
30
1
Support, Louver
066-94667-000
31
1
Support, Louver
075-01655-000
32
1
Panel, Louver
075-01670-000
33
1
Panel, Top
066-94666-000
34
2
Support, Louver
066-94663-000
35
2
Support, Louver
075-01654-000
36
1
Panel, Louver
075-01656-000
37
1
Panel, Louver
075-05642-000
38
1
Support, Top L.H. Grille
075-05645-000
39
1
Support, Top L.H. Grille
075-05646-000
40
2
Support, Grille
075-05647-000
41
2
Support, Grille
FIG. 33 – COMPLETED INSTALLATION
25246A
FIG. 34 – WIRE GRILLE INSTALLATION
LD00585
R.H. END VIEW
NOTES:
1. Remove header covers & discard.
2. Attach Items 50, 51, 58, 62, 64, 65 &
66 before attaching grilles.
3.
4.
5. Trim grilles to suit wiring, water
connections etc.
6. Notch out grilles as required when high
amb.. sun shield option is used.
