32
YORK INTERNATIONAL
GENERAL
Pressing the STATUS key will enable the operator to
determine current chiller operating status as a whole
and as individual systems. The messages displayed
will include running status, cooling demand, fault sta-
tus, external cycling device status, and anti-recycle
timer status. The display will be a single message re-
lating to the highest priority message as determined
by the micro. Status messages fall into the categories
of General and Fault Status with each of the catego-
ries discussed below.
GENERAL STATUS MESSAGE
Each of the general status messages with a descrip-
tion of its meaning will follow. In the case of messages
which apply to individual systems, SYS 1 and SYS 2
messages will both be displayed and may be different.
“X”’s in the sample displays indicate numerical values
will appear in actual displays.
This message informs the operator that the “UNIT”
switch on the Control Panel is in the OFF position which
will not allow the chiller to run.
The DAILY SCHEDULE SHUTDOWN message indi-
cates that the schedule programmed into the “CLOCK”
“SET SCHEDULE/HOLIDAY” is keeping the chiller from
running.
Run Permissive is an indicator that an external cycling
contact (i.e. thermostat) connected to terminals 13 and
14 is open, or a system switch(es) on the Micropro-
cessor Board is in the OFF position. Whenever the
contact is open or a switch is OFF, the NO RUN PERM
will be displayed.
The COMP RUNNING message indicates that the re-
spective compressor is running due to demand.
“STATUS” KEY
26572A(D)
U N I T S W I T C H I S I N
T H E O F F P O S I T I O N
D A I L Y S C H E D U L E
S H U T D O W N
S Y S # 1
N O R U N P E R M
S Y S # 2
N O R U N P E R M
S Y S # 1
C O M P R U N N I N G
S Y S # 2
C O M P R U N N I N G
STATUS KEY
