York YCAV0569, Installation Operation & Maintenance

Page: 214 / 278

214
JOHNSON CONTROLS
FORM 201.21-NM2 (616)
The values displayed under each of the key presses may
be changed by keying in new values and pressing the

(ENTER) key to store the new value into memory.
Where more than one value may be keyed in on a dis-
play, a portion of the data that does not need updating
may be skipped by pressing the

(ENTER) key. The

(ENTER) key must also be pressed after the last value
in the display to store the data into memory.
The ▲ (ARROW) key allows scrolling back through
the setpoints displays.
The minimum, maximum, and default values allowed
under the SETPOINTS key are provided in TABLE
16, below:
SETPOINTS KEY (CON'T)
TABLE 16 - SETPOINT LIMITS
PROGRAM VALUE MODE LOW LIMIT HIGH LIMIT DEFAULT
Leaving Chilled Liquid Setpoint
Water Cooling
40.0°F 60.0°F 44.0°F
4.4°C 15.6°C 6.7°C
Glycol Cooling
15.0°F 70.0°F 44.0°F
-9.4°C 15.6°C 6.7°C
Leaving Chilled Liquid Control Range
- 1.5°F 2.5°F 2.0°F
0.8°C 1.4°C 1.1°C
Max. Remote Temperature Reset
- 2°F 40°F 20°F
1°C 22°C 11°C
MICRO PANEL