•
Failure to satisfy any of these conditions will automatically void the warranty.
SAFETY
YCAE-X units are designed and built within an ISO 9001 accredited design and manufacturing
organization.
Fluorinated Greenhouse Gases
•
This equipment contains fluorinated greenhouse gases covered by the Kyoto Protocol.
•
The GWP (global warming potential) of the refrigerant (R410A) used in this unit is 2088.
•
The refrigerant quantity is stated in the Physical Data table of this document.
•
The fluorinated greenhouse gases in this equipment may not be vented to the atmosphere.
•
This equipment should only be serviced by qualified technicians.
Responsibility for Safety
Every care has been taken in the design and manufacture of the unit to ensure compliance with the
safety requirements listed above. However, the individual operating or working on any machinery is
primarily responsible for:
•
Personal safety, safety of other personnel, and the machinery.
•
Correct utilization of the machinery in accordance with the procedures detailed in the manuals.
The contents of this manual include suggested best working practices and procedures. These are
issued for guidance only, and they do not take precedence over the above stated individual
responsibility and/or local safety regulations.
This manual and any other document supplied with the unit are the property of Johnson Controls
which reserves all rights. They may not be reproduced, in whole or in part, without prior written
authorization from an authorized Johnson Controls representative.
MISUSE OF EQUIPMENT
Suitability for Application
The unit is intended for cooling/heating water or glycol solutions and is not suitable for purposes other
than those specified in these instructions. Any use of the equipment other than its intended use, or
operation of the equipment contrary to the relevant procedures may result in injury to the operator, or
damage to the equipment.
The unit must not be operated outside the design parameters specified in this manual.
Structural Support
Structural support of the unit must be provided as indicated in these instructions. Failure to provide
proper support may result in injury to the operator, or damage to the equipment and/or building.
Mechanical Strength
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz
