Press “TIMER” to toggle between Year, Month, Day, Hour and Minute. Press “UP” and “DOWN” icons
to modify the values.
Touch and hold the icons to increase or decrease the values by 5 each time.
Press “CONFIRM” to save the value and auto switch to the next setting. Press “TIMER” to cancel the
operation and auto switch to the next setting.
The setting will terminate if there’s no operation for 5 seconds or “CANCEL” is pressed.
Schedule Timer
Press the “TIMER” key for 5 seconds to enter Schedule Timer setting screen. The “TIMER”, “SET”
and “ON” icons will flicker while the function is activated.
The Schedule Timer will toggle between Timer ON, Timer OFF and Timer Mode.
Press “FUNCTION” to select Hour and Minute which are able to be set by “UP” and “DOWN” keys.
Once the setting is finished, press “CONFIRM” to save the value and auto switch to the next setting.
Press “TIMER” to cancel the operation and auto switch to the next setting.
In Timer Mode setting, press “FUNCTION” to switch the modes between ONCE, DAILY and WEEKLY.
Press “CONFIRM” to save the value and auto switch to the next setting. Press “TIMER” to cancel the
operation and auto switch to the next setting.
In WEEKLY timer setting, the weekdays are able to be switched over by pressing “FUNCTION” key.
Pr
ess “UP” to “CONFIRM” the weekday timer activation and move on to the next weekday. Press
“DOWN” to cancel the activation of the weekday and move on to the next.
The Schedule Timer setting will terminate if there’s no operation for 5 seconds or “CANCEL” is
pressed.
Parameter Setting
Press the “FUNCTION” key in daily display for 5 seconds to enter System Parameter Setting screen.
Repeat the operation to enter Module Parameter Setting screen. The “LOCK” icon will appear while
the function is activated.
In System Parameter Setting, the parameters will be displayed in hour display area (Area 1) in
sequence by pressing “FUNCTION” key.
In Module Parameter Setting, the modules can be switched over by pressing “TIMER” key.
Press “UP” or “DOWN” to set the value and press “CONFIRM” to save the value. The setting will
terminate if there’s no operation for 5 seconds or “CANCEL” is pressed.
Fault Diagnosis
Press “FUNCTION” and “CANCEL” keys for 5 seconds to enter Fault Diagnosis. The “FAULT” icon
will appear while the function is activated.
The fault codes will be displayed in temperature display area (Area 3) with time recorded. The serial
number of the module will be displayed as 10-bit of Area 4.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz
